SiC, Motor Drivers, Current Transducers & more - New Product Highlights from PCIM

This year’s PCIM power electronics exhibition, held in Nuremberg, Germany, attracted over 10,000 visitors from around the world, a slight increase on last year’s figures. As in previous years, all the leading manufacturers of power electronics components and equipment were present to showcase their latest offerings. Here are our highlights of the best new products debuted at the show.

By Sally Ward-Foxton

PCIM 2017 attracted over 10,000 visitors

 

SiC Mass Production

Infineon announced that the company’s first all-SiC power module, the Easy 1B, has gone into volume production, a year after the module was first announced at last year’s PCIM. The Easy 1B is a half-bridge/booster module with a low RDS(ON) of only 45mΩ, suitable for drives, solar inverters and welding equipment.

The company also revealed details of upcoming SiC products. The Easy 2B half-bridge module is a larger device than the 1B with enhanced RDS(ON) of 8mΩ per switch, designed for fast switching applications such as solar inverters, quick-charging systems and UPS. There is also a new 62mm half-bridge SiC module offering even higher power capability with RDS(ON) of 6mΩ for medical and railway auxiliary power supplies. The company will also offer discrete SiC MOSFETs in TO-247 3- and 4-pin packages, as well as bare die.

While SiC transistors offer higher efficiency, increased power density and smaller footprints, they are still much more expensive than comparable silicon products.

“For today and tomorrow, and I’m tempted to say, for ever, the comparable SiC device will be more costly than silicon,” said Peter Wawer, Division President for Industrial Power Control at Infineon. “But SiC is at the beginning of high volume manufacturing where silicon is already several decades behind. We will see a significant price decline; we expect that this gap will close to a certain extent, but will always remain.”

Wawer went on to explain that there are still financial savings to be made in terms of system costs, since SiC products require less complex surrounding circuitry. For some applications, this cost benefit is already apparent, he said.

 

Compressible Thermal Interface

Panasonic Automotive and Industrial Systems Europe had a much larger booth than last year, showing off the company’s semiconductors, passive components and thermal management solutions.

Panasonic’s SoftPGS thermal interface material comes in sheets the size of popular IGBT modules

Demonstrated on the booth was the company’s pyrolytic highly oriented graphite sheet (PGS) material, a thermal interface material which is one of the thinnest in the world. The latest materials in this group have impressive thermal conductivity of 1950 W/mK, five times higher than copper. There is now a brand new soft version called SoftPGS which offers lower thermal conductivity of 400 W/mK in the X-Y direction (28 W/mK in the Z direction) but is only 200µm thick and 40% compressible, ideal for protecting sensitive electronics from heat damage. Standard sized sheets of SoftPGS are available to match popular IGBT modules on the market. Panasonic say SoftPGS is less labour-intensive to install than thermal greases or phase change materials.

 

Higher Voltage Gate Drivers

Power Integrations introduced a new gate driver IC that supports 1700-V IGBTs, a new addition to its SCALE-iDriver IC family which previously only went up to 1200V.

PI’s SCALE-iDriver IGBT driver now supports 1700 V operation

The SCALE-iDriver range is a family of galvanically isolated single-channel gate drivers which use the company’s FluxLink magneto-inductive technology to communicate between the primary side and secondary side circuits. This reduces the switching losses found in comparable products that use opto-coupler technology. FluxLink can communicate through the new part’s >0.4mm of internal isolation, and the part offers >9.5mm of creepage.

With the new higher voltages, the SCALE i-Driver family is now suitable for 400VAC and 690 VAC line applications, as well as three-level photovoltaic inverters and photovoltaic arrays using the new 1500V DC bus standard.

 

Fast Current Transducers

The newly-introduced LEM GO family of current transducer ICs based on its state of the art Hall sensor ASIC, which offers a good tradeoff between accuracy and speed. These devices are a level above simple open loop Hall effect transducers – they feature primary integrated conductors for gradient measurement, which also provide immunity against any external magnetic fields from the environment.

The LEM GO range of current transducers responds quickly and accurately

There are 8 parts in the GO range for measuring nominal 4 A up to 30 A (DC, AC or pulsed); they can measure up to 2.5x the nominal current and withstand up to 200 A peak overload current for 1 ms. Response time is 2.0 µs and accuracy is as good as 1.3%.

The GO range includes an internal overcurrent detection feature which responds quickly (within 2.1 µs), triggered by currents at almost ±3x nominal current (accuracy 10%), plus an external overcurrent detection which is slower (10 µs response) but more accurate (5%), and the threshold can be set by two resistors.

A combination of the GO series’ response speed and overcurrent detection makes it suitable for AC drives. The parts come in SO8 or SO16 SMD packages. 

 

Sinusoidal Motor Drivers

Allegro Microsystems previewed a couple of motor driver ICs for fans, both for 3-phase sensorless BLDC motors control. The A5931incorporates sinusoidal drive to minimise audible noise and vibration. Also featuring 180° sinusoidal drive, the A5932 is designed to drive external N-channel power MOSFETs in server fan applications.

Allegro’s APS13568 is a magnetic sensor and LED driver in one package

Also on show was Allegro’s latest position sensor, the APS13568, a Hall effect sensor IC that acts as a magnetically-operated light switch for car sun visors and refrigerator doors. The part combines an ultrasensitive, omnipolar, micropower Hall-effect sensor switch with a linear programmable current regulator providing up to 150 mA to drive high brightness LEDs.

 

Entry Level Oscilloscope

And finally: on the Rohde & Schwarz booth, the company showcased the highlights of its oscilloscope portfolio, including the recently introduced RTB2000, an entry level oscilloscope for the education, R&D and production markets. This new oscilloscope incorporates features previously only found on more expensive equipment, such as a 10.1” capacitive touch screen, 10-bit vertical resolution and a 10 Msample per channel acquisition memory. It comes in two- or four-channel models with bandwidths between 70 and 300 MHz.

The Rohde & Schwarz RTB2000 has high end features with an affordable price tag


Related


USB Type C solutions

Diodes’ PI5USB30213A USB 3.1 Gen 1 and the PI5USB31213A USB 3.1 Gen 2 USB Type-C™ controllers with configuration channel (CC) logic and 5V VCONN sourcing are the most complete Type C s...

Active Cooling of Optical Transceivers

The thermal solution for transceiver cooling in an outdoor environment yields an optimal solution to maintain form factor and minimize latency of a remote radio unit. Laird’s ATC line of min...

Performance Optimization of DC Link Systems

This webinar will review the design of the DC Link System using optimized solutions based on integrated capacitor-busbar technology from Rogers Corporation. Due to lower overshoot voltages and les...

Power challenges for IoT and data centers

Martin Hägerdal, Head of Ericsson Power Modules, and Bob Cantrell, the company's Senior Application Engineer, discuss the major drivers of product innovation in digital power modules. The...

Intelligent optimization of power

In this webtalk, Mark Adams, Senior VP at CUI, explains software defined power moving from the board level to its application in data centres or COLO facilities. Software defined power can enable ...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market, us...

USB 3.1 Type-C Solutions from TI and WE

The USB-C momentum is growing and quickly being adopted in a variety of end equipment. This new reversible & flippable ecosystem offers new possibilities for how applications will use and deli...

Simple-to-use, small and brushed motor driver

This Webtalk discusses the MAX14871 from Maxim Integrated, the industry’s simplest-to-use, smallest & most flexible brushed motor driver. It is explained why the part was designed - i.e....

Not all regulators are created equal

Power Engineers constantly find themselves making selections among linear regulators, switching regulators and how much integration they need in their systems. However, with the state of the art proce...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market...

Need help with your Sigma Delta Signal Chain?

Lifting the lid on Industry Leading Sigma Delta Technology for Industrial Environment. Understand the key trade-offs in performance, power and noise to optimise your signal chain performance and e...


Defining IoT and Industry 4.0 with embedded systems

Embedded systems play a vital role in both characterizing and developing the Internet of Things as well as in creating new processes in automation. They address several requirements of IoT solutions a...

 


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...