CompactPCI Serial now reaches out into space

Space CompactPCI Serial allows the use of established industrial technology in space. This permits the cost-effective use of the latest technology for space applications. The open standard guarantees the interoperability of different boards from different suppliers, and helps re-use solutions from mission to mission.


By Manfred Schmitz, MEN                                                 Download PDF version of this article


Recently, the US-based Internet service supplier OneWeb ordered 900 satellites to provide global Internet broadband service. Knowing that this volume is more than half of the total 1400 satellites already in orbit, and the cost of sending one up into space is about 100 million dollars, you need to start thinking about new computer technologies that could help to manage this mass of satellites that need to be produced every year.

The commercialization of aerospace, like this OneWeb project, progresses and increases the pressure on established companies to develop competitive products for this market. One possible option is to count on standards in order to save time and cost during development, and also during project life-cycle. Taking an existing standard and adapting it to the requirements for space was also the solution a group of global players in space like Airbus, Thales Alenia, and others went for. They decided to go with a rather new and powerful, already industry-proven with its predecessor versions, standard: CompactPCI Serial. Using a standard like this also helps to contribute to the obsolescence problem of avionics hardware, as well as to significantly reduce complexity and costs for hardware/software.

The new technical PICMG sub-committee Space CompactPCI Serial is now extending the current CompactPCI Serial specification by a sub-standard covering the specific requirements for space applications. Players in this working group are, in addition to Airbus and the initiating companies STI Spacetech, Sysgo and TTTech, also Amphenol FCI, EKF, Elma Electronic, Erni, Fastwel, Harting, Heitec, Intel, Keysight, Pentair and Positronic, with MEN Micro acting in a consultative role, having already been strongly involved in the development of the CompactPCI PlusIO and CompactPCI Serial standard.

Even if VPX was – with the exception of completely customized solutions – for a long time the only standard for embedded systems in space, CompactPCI also has a long history in space applications. Famous examples are the Curiosity Mars rover for satellite control, or implementations for scientific tasks in the ISS. Even the CompactPCI Serial base specification has the mechanical and conduction cooling technologies needed for space already defined and in place.

In addition, compared to VPX, the flexible CompactPCI Serial standard offers an easier and cost-optimized development. Space CompactPCI Serial is therefore the most logical choice for implementing high-tech solutions for a highly sophisticated market, while both re-using and evolving proven industrial technologies and reaching significant cost reductions. At the same time, some unused features have been removed to make the standard more streamlined, and other properties have been added to optimize the standard for use cases. The two main changes in the extension of the CompactPCI Serial specification are the definition of a dual-star architecture for increased availability, and allowing the integration of different communication protocols common in space applications for both the dual-star and the full-mesh network (which was formerly restricted to Ethernet only).

The CompactPCI Serial basic specification defines a single-star architecture, while Space CompactPCI Serial now doubles these interconnects in a symmetrical way, so if one CPU fails, the functionality of the complete system will not be affected. Having this increase in availability was essential for use in space, especially since you cannot simply exchange a CPU card installed in a satellite in orbit. In addition to the system slot (A) on the left side of the system, a second system slot (B) on the right side of the system uses the same routing method. All seven peripheral slots are connected to both system slots, and both system slots are connected to each other. All together, these links build a fully meshed interconnectivity network. The full-mesh network is not restricted to any particular protocol, and may be used for physical interconnection standards like Ethernet, SpaceWire, TTEthernet, EtherSpace etc. Parallel to the full-mesh network, both system slots can be connected to any of the peripheral boards by means of eight specific differential links. These links could be also used for any protocol, depending on the application and the individual boards. This dual-star architecture is intended to be used in high availability solutions. The result is a parallel and flexible usage of the full-mesh Ethernet network via the backplane, as well as the dual-star architecture via PCI-Express or any other protocol.

In addition to that, the specification defines a utility connector, which can be controlled and configured via an open management bus. It takes over the hot-plug functionality, as it was used for CompactPCI Serial, and allows single cards within a system to be switched on and off. Hot-plug functionality is indeed not necessary for satellites in the orbit, but is extremely useful during integration on ground and for test systems, which can be still realized via PCI-Express and with common CompactPCI Serial cards.

As Space CompactPCI Serial is intended to be used in a conduction-cooled environment, the board-to-board pitch is defined to 5HP (= 25.4 mm) to allow a conduction cooling frame for each board. To make the standard specification easier, the pitch will remain the same even if the boards do not need a conduction cooling frame (e.g. for testing systems on ground), which would just require a 4HP pitch. At the moment, members of the working group are already working on specific standard backplanes for Space CompactPCI Serial. The high-speed backplane interconnects and the connectors are intended to support data rates of 12.5 Gbit/s per differential pair. The accelerated bandwidth of the full mesh is 400 Gbit/s, additionally the dual-star interconnect simultaneously supports a 1 Tbit/s throughput rate. Infrastructure signals allow comfortable and flexible system management. In addition to I²C bus, CAN bus is also supported. The power supply is 12 volts only. Optionally, a 5 volt standby voltage could be used to support suspend modes or sleep modes. Power rails can be a single plane, or every board could be supplied and controlled individually. The power supply and the system management are not a part of the Space CompactPCI Serial specification.

The harsh environments in space and especially the vacuum conditions make high demands on the connectors. The material must not outgas, as some outgassed materials can deposit on the sensitive lenses in the satellites. A corresponding outgassing test has already confirmed the qualification of the connectors used for Space CompactPCI Serial. However, other mechanical or environmental measures, like SEU-resistance are not defined in the standard specification, as this always depends on the customer requirements, and the boards design within the application and end system. The working group just finished the specification recently and will plan to bring it into the PICMG ballot during the second quarter of 2017.

Space CompactPCI Serial allows the use of established industrial technology in space. This extends the cost-effective use of the latest technology to space applications. The open standard guarantees the interoperability of different boards from different suppliers, and helps re-use solutions from mission to mission. Keep an eye out for this new great standard, which open the doors for highly available and reliable applications, both in space and on the ground.


Related


Cloud for flat-panel controllers and RFID readers

The first cloud for flat-panel controllers offers full connectivity to enable central parameterization and constant monitoring of the operational status of displays. This brings two clear advantages: ...

PCAP Touch displays - what does the future hold?

In this article the author compares three different touch technologies and examines their suitability for industrial applications. Figure 1. Example of a touch panel with Force Touch in a medic...

Fluffing the Cloud

The synergistic development aspect of electronic design was very apparent these past weeks at the APEC and Embedded World shows, as engineers from around the globe came together in San Antonio, Texas,...

 


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


ROHM explains their latest wireless battery charger solution kit

In this video an engineer from ROHM goes over their latest wireless power development kit, co-developed with Würth for embedded development. The kit provides a complete wireless power transfer sy...


Tektronix describes their latest mixed-signal oscilloscope

In this video Tektronix explains the features in their latest 5 Series MSO Mixed Signal Oscilloscope. Features include an innovative pinch-swipe-zoom touchscreen user interface, a large high-definitio...


AVX shows a supercapacitor demonstrator at APEC

In this video Eric from AVX explains their supercapacitor demonstrator box at APEC 2018 in San Antonio, Texas. The box shows how a 5V 2.5-farad supercapacitor can quickly charge up using harvested ene...


OnSemi explains their latest passive smart wireless sensor for industrial applications

In this video On Semiconductor explains their latest wireless sensor for hazardous environments at APEC in San Antonio, Texas. Intended for applications like high-voltage power cabinets and other plac...


TI demonstrates an improved gaming power system at Embedded World

In this video Texas Instruments' explains Significant reduction in ripple, which results in improved reliability and increased design margins, among other advantages. Another benefit that improve...


Infineon explains their latest motor drive technology at APEC 2018

In this video Infineon demonstrates new gate drivers using their LS-SOI technology at APEC 2018. In the demo Victorus, an Infineon application engineer, shows in real time how much better thermal the ...


STMicro goes over their latest wireless-enabled microcontroller for the IoT

In this video STMicroelectronics goes over their latest wireless-enabled STM32WB microcontroller for the IoT and intelligent devices in several live connectivity demonstrations at Embedded World 2018....


Infineon explains their latest wireless charging solution at Embedded World

In this video Infineon goes over their latest wireless charging solutions at the Embedded World show in Nuremberg, Germany. The spokesperson explains the difference between their Qi-compatible solutio...


Grammatech talks about the importance of software in engineering

In this video Mark Hermeling of Grammatech talks to Alix Paultre after the Embedded World show in Nuremberg about the importance of software verification for security and safety in electronic design. ...


Lattice Semi walks through their booth demos at Embedded World

In this video Lattice Semiconductor walks us through their booth demonstrations at Embedded World 2018. The live demonstrations include an operating IoT remote vehicle, a low-power network used for vi...


Maxim describes their latest security solution at Embedded World 2018

In this video Scott from Maxim Integrated describes their latest security solution at Embedded World 2018. In the live demo he shows the DS28E38 DeepCover Secure ECDSA Authenticator, an ECDSA public k...


Garz & Fricke at Embedded World 2018 - Embedded HMIs and SBCs “Made in Germany”

You are looking for a HMI-system or single components as touches, displays and ARM-based SBCs? Welcome at Garz & Fricke – the Embedded HMI Company! Our offering ranges from typical single co...


ECRIN Systems myOPALE: Remote Embedded Modular Computers

myOPALE™ offers disruptive technology to multiply capabilities of your next Embedded Computers in a smaller foot print thanks to PCI Express® over Cable interconnect, standard 5.25’&rs...


TechNexion rolls out embedded systems, modules, Android Things kits at Embedded World 2018

In this video John Weber of TechNexion talks to Alix Paultre about how the company helps its customers getting products to market faster. By choosing to work with TechNexion, developers can take advan...


Mike Barr talks cybersecurity

In this video Mike Barr, CEO of the Barr Group, talks to Alix Paultre about cybersecurity at the Embedded World conference in Nuremberg, Germany. Too many designers, even in critical spaces like milit...