Let TI and MathWorks help you launch your next motor control design - in cooperation with Digi-Key

In this webinar, learn how you can quickly design a new motor control system using Embedded Coder® from MathWorks and the C2000™ family of microcontrollers from Texas Instruments. We walk through a demo of Simulink running two three-phase motors simultaneously using the F28069M LaunchPad™ development kit.

TI’s C2000™ MCUs have been focused on easing motor control design for over 20 years. From the older C24x DSP engine to the latest C28x floating-point DSP, C2000 MCUs provide a range of processing performance from 60 MHz to dual-core 200 MHz CPUs as well as analog and control peripherals necessary for premiere control systems. Along with the unique hardware solutions, C2000 MCUs also include the InstaSPIN-FOC™ and InstaSPIN-Motion™ software solutions, which ease three-phase motor design.

MathWorks provides software that enables modeling, simulation, and code generation of control systems using Simulink® and Embedded Coder®. Embedded Coder support for TI’s C2000 family of microcontrollers includes automated build and execution, processor-optimized code including DMC and IQMath libraries, and the ability to perform processor-in-the-loop (PIL) tests with execution profiling.

Speakers

  • Matthew Pate -TI C2000™ MCUs Product Marketing. Matthew has been with Texas Instruments for over 16 years, and the C2000 MCU Business for 13 of those.  Involved in aspects of both HW and SW architecture and validation of the C2000 product lines during his career, Matthew is excited to help customers succeed with C2000 in their system.
  • Brian McKay – Embedded Systems Technical Marketing Manager. Brian McKay manages MathWorks solutions for embedded systems customers featuring TI hardware. Brian has been building customer solutions that combine MathWorks software with embedded hardware for over 10 years.
  • Antonin Ancelle - Embedded Targets Development Manager. Antonin Ancelle leads the embedded targets development at MathWorks for TI hardware platforms and many others. With a decade of experience developing and working with MathWorks tools, Antonin is passionate about sharing his technical knowledge with embedded engineers.


 


Related


Is the Universal Translator Finally Here?

This webinar from NXP will provide a detailed insight on why these advanced, extremely-low power translators from NXP Logic are the solution for your mixed voltage applications! Today's modern,...

Driving lower power for MCU products even lower

The MSP430 microcontroller family from Texas Instruments prides itself on extremely low power consumption. However, their flagship power consumption is contingent upon various properties like supply...


Hardware-based AES Encrypted Storage Solution

Secure data encryption is essential for a wide variety of mission-critical applications pertaining to both civilian matters and national security. These sectors both require comprehensive safeguards t...

Give Your Product a Voice with Alexa

Join us for a deep dive into the system architecture for voice-enabled products with Alexa Built-In. Device makers can use the Alexa Voice Service (AVS) to add conversational AI to a variety of produc...

The two big traps of code coverage

Code coverage is important, and improving coverage is a worthy goal. But simply chasing the percentage is not nearly so valuable as writing stable, maintainable, meaningful tests. By Arthur Hick...

 

nVent Schroff at Embedded World 2019

The theme of the nVent Schroff booth at Embedded World 2019 was “Experience Expertise – Modularity, Performance, Protection and Design”. Join us as our experts give an overview of th...


Garz & Fricke Interview at Embedded World 2019 with Dr. Arne Dethlefs: We are strengthening our presence in North America

Through its US subsidiary, located in Minnesota, Garz & Fricke is providing support for its growing HMI and Panel-PC business in the USA and Canada while also strengthening its presence in North A...


SECO's innovations at embedded world 2019

In a much larger stand than in previous years, at embedded world 2019 SECO showcases its wide range of solutions and services for the industrial domain and IoT. Among the main innovations, in this vid...


Design and Manufacturing Services at Portwell

Since about two years Portwell is part of the Posiflex Group. Together with KIOSK, the US market leader in KIOSK systems, the Posiflex Group is a strong player in the Retail, KIOSK and Embedded market...


Arrow capabilities in design support

Florian Freund, Engineering Director DACH at Arrow Electronics talks us through Arrow’s transformation from distributor to Technology Platform Provider and how Arrow is positioned in both, Custo...


Arm launches PSA Certified to improve trust in IoT security

Arm’s Platform Security Architecture (PSA) has taken a step forward with the launch of PSA Certified, a scheme where independent labs will verify that IoT devices have the right level of securit...


DIN-Rail Embedded Computers from MEN Mikro

The DIN-Rail system from MEN is a selection of individual pre-fabricated modules that can variably combine features as required for a range of embedded Rail Onboard and Rail Wayside applications. The ...


Embedded Graphics Accelerates AI at the Edge

The adoption of graphics in embedded and AI applications are growing exponentially. While graphics are widely available in the market, product lifecycle, custom change and harsh operating environments...


ADLINK Optimizes Edge AI with Heterogeneous Computing Platforms

With increasing complexity of applications, no single type of computing core can fulfill all application requirements. To optimize AI performance at the edge, an optimized solution will often employ a...


Synchronized Debugging of Multi-Target Systems

The UDE Multi-Target Debug Solution from PLS provides synchronous debugging of AURIX multi-chip systems. A special adapter handles the communication between two MCUs and the UAD3+ access device and pr...


Smart Panel Fulfills Application Needs with Flexibility

To meet all requirement of vertical applications, ADLINK’s Smart Panel is engineered for flexible configuration and expansion to reduce R&D time and effort and accelerate time to market. The...


Artificial Intelligence

Morten Kreiberg-Block, Director of Supplier & Technology Marketing EMEA at Arrow Electronics talks about the power of AI and enabling platforms. Morten shares some examples of traditional designin...


Arrow’s IoT Technology Platform – Sensor to Sunset

Andrew Bickley, Director IoT EMEA at Arrow Electronics talks about challenges in the IoT world and how Arrow is facing those through the Sensor to Sunset approach. Over the lifecycle of the connected ...


AAEON – Spreading Intelligence in the connected World

AAEON is moving from creating the simple hardware to creating the great solutions within Artificial Intelligence and IoT. AAEON is offering the new solutions for emerging markets, like robotics, drone...


Arrow as a Technology Provider drive Solutions selling approach

Amir Sherman, Director of Engineering Solutions & Embedded Technology at Arrow Electronics talks about the transition started couple of years ago from a components’ distributor to Technology...


Riding the Technology wave

David Spragg, VP, Engineering – EMEA at Arrow Electronics talks about improvements in software and hardware enabling to utilize the AI capabilities. David shares how Arrow with its solutions is ...


ASIC Design Services explains their Core Deep Learning framework for FPGA design

In this video Robert Green from ASIC Design Services describes their Core Deep Learning (CDL) framework for FPGA design at electronica 2018 in Munich, Germany. CDL technology accelerates Convolutional...


Microchip explains some of their latest smart home and facility solutions

In this video Caesar from Microchip talks about the company's latest smart home solutions at electronica 2018 in Munich, Germany. One demonstrator shown highlights the convenience and functionalit...


Infineon explains their latest CoolGaN devices at electronica 2018

In this video Infineon talks about their new CoolGaN 600 V e-mode HEMTs and GaN EiceDRIVER ICs, offering a higher power density enabling smaller and lighter designs, lower overall system cost. The nor...


Analog Devices demonstrates a novel high-efficiency charge pump with hybrid tech

In this video Frederik Dostal from Analog Devices explains a very high-efficiency charge-pump demonstration at their boot at electronica 2018 in Munich, Germany. Able to achieve an operating efficienc...