Drive and acquire RF signals right out of the box - getting Started with PicoZed SDR

One of the 1st steps when prototyping a software-defined radio system is to generate and capture RF signals over the air into the system. In this webinar we will take you through the architecture of the Analog Devices AD9361 transceiver, featuring Xilinx Zynq AP SoC and demonstrate how to capture and visualize RF signals to get started quickly with the recently released PicoZed SDR.

Speakers

  • Luc Langlois – Director, Global Technical Marketing, Avnet Electronics Marketing
  • Robin Getz     – Director of Systems Engineering, Analog Devices


 


Related


SiC MOSFETs in hard-switched half-bridges

Silicon carbide (SiC) MOSFETs are making major inroads into solar inverters. Engineers are keen to achieve high efficiency across the entire load range. SiC MOSFETs' low on-state resistance and ...

Cooling Options for PET and SPECT Scanners

Thermal management of medical imaging systems is more challenging than ever. Given the complexity of some PET and SPECT systems, the use of a custom designed liquid cooling systems with plug-and-play ...

Active Cooling of Optical Transceivers

The thermal solution for transceiver cooling in an outdoor environment yields an optimal solution to maintain form factor and minimize latency of a remote radio unit. Laird’s ATC line of min...

Performance Optimization of DC Link Systems

This webinar will review the design of the DC Link System using optimized solutions based on integrated capacitor-busbar technology from Rogers Corporation. Due to lower overshoot voltages and les...

Power challenges for IoT and data centers

Martin Hägerdal, Head of Ericsson Power Modules, and Bob Cantrell, the company's Senior Application Engineer, discuss the major drivers of product innovation in digital power modules. The...

Intelligent optimization of power

In this webtalk, Mark Adams, Senior VP at CUI, explains software defined power moving from the board level to its application in data centres or COLO facilities. Software defined power can enable ...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market, us...

USB 3.1 Type-C Solutions from TI and WE

The USB-C momentum is growing and quickly being adopted in a variety of end equipment. This new reversible & flippable ecosystem offers new possibilities for how applications will use and deli...

Simple-to-use, small and brushed motor driver

This Webtalk discusses the MAX14871 from Maxim Integrated, the industry’s simplest-to-use, smallest & most flexible brushed motor driver. It is explained why the part was designed - i.e....

Not all regulators are created equal

Power Engineers constantly find themselves making selections among linear regulators, switching regulators and how much integration they need in their systems. However, with the state of the art proce...

Jump start your Hall-effect sensor expertise

Hall-effect magnetic sensors are an integral part of modern electronics, bridging physical movement to digital information.  This technical dive explores the technology, devices on the market...

Need help with your Sigma Delta Signal Chain?

Lifting the lid on Industry Leading Sigma Delta Technology for Industrial Environment. Understand the key trade-offs in performance, power and noise to optimise your signal chain performance and e...


An introduction to the SuperTest MISRA suites

The SuperTest MISRA suites are created to verify the conformance of MISRA checking software. The aim of a, so-called, MISRA checker is to check application software for its compliance with the MIS...

Coding safe and secure applications

The world is becoming far more connected, and systems are vulnerable to malicious attacks via these connections. Safety and security are different, but there are some common ways to achieve them i...

Data Distribution Service in autonomous car design

Builders of autonomous vehicles face a daunting challenge. To get a competitive edge, intelligent vehicle manufacturers must deliver superior driving experience while meeting demanding requirement...

Nine Steps to Choosing The Right Coding Standard

Selecting the right coding standard is an essential building block for safe and secure coding. While superficially many coding standards and automatic analysis tools may look similar, they can be quit...

Basics and tools for multi-core debugging

In the past, debugging meant seeking for variables written with wrong values. These days, it’s completely different: for the multi-core systems used nowadays in automotive control units, deb...

 


ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...


Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...


Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...


Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...


STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...